Well-measured Thermal Gas Mass Flowmeter

Product Description:

The Thermal Gas Mass Flow Meter is an instrument that uses the principle of heat conduction to measure flow.  The instrument uses constant temperature difference method for gas mass flow  
Carry out accurate measurements.  It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.  The sensor part consists of two basic level platinum resistance temperature sensors.  Using a bridge loop, one sensor measures the flow temperature and the other maintains a constant temperature difference above the fluid temperature, allowing flow measurement under high temperature and high pressure conditions. 

Our company's electromagnetic flowmeter, Precession Vortex Flowmeter, Thermal Gas Mass Flowmeter and other products are very high measurement accuracy, balance flowmeter, Nozzle Flowmeter are often used, our products are also very professional.

The thermal gas mass flow  meter has the following technical advantages:  
◆ It is convenient and accurate for gas flow measurement without temperature and pressure compensation.  The mass flow rate or standard volume flow rate of the gas can be obtained.  

◆ Wide range ratio, can measure gas flow rates as low as 0.5Nm/s(limit expansion 0.08Nm/s) and as high as 100Nm/s(limit expansion 120Nm/s), can be used in gas pipelines and equipment.  

◆ Good seismic performance, long service life.  The sensor has no moving parts and pressure sensing parts, and is not affected by vibration on the measurement accuracy.  

◆ Easy installation and maintenance.  If site conditions permit, it can be installed and maintained without stopping production.  (See Safety Precautions.)  

◆ Digital design.  Overall digital circuit measurement, accurate measurement, easy maintenance.  

◆ RS-485 communication, or HART communication.